1 8

Game Boy Pocket Laminated 2.8 inch IPS Kit - Hispeedido

Game Boy Pocket Laminated 2.8 inch IPS Kit - Hispeedido

$60.99
$60.99
Sale Sold out
Shipping calculated at checkout.

Upgrade your Gameboy Pocket to a 2.8" IPS kit from HISPEEDIDO! Experience a stunning 480x432 display that's 22% larger than the original LCD, with 20 brightness levels, 36 color modes, and 5 retro pixel effect modes to customize your gameplay.

FEATURES:

  • 480x432 display resolution
  • 22% larger than the original LCD
  • Built-in OSD Menu
  • 20 brightness levels
  • 36 Color modes
  • 5 Retro Pixel Effect Modes
  • FRM on/off function (Frame blending on/off).
  • Touch Shortcut on/off function. Set 'Touch Shortcut' off to avoid auto cycling color modes.
  • Battery level display on/off.
  • Supports contrast wheel brightness adjustment.
  • Soldering BAT wire for basic functionality required. Optional soldering for A/B/Select OSD menu functions.
  • Display area is larger than the original. We only recommend using a custom laminated shell from Hispeedido. Shell modification required for all other shells. No refunds are given if a non-recommended shell is used.

INCLUDED:

  • 1x IPS Screen
  • 1x PCB
  • 1x Flex Cable
  • 4x Wires

PAIRS WELL WITH:

DOCUMENTATION:

NOTES:

  • Touch both touchpads for 3 seconds to activate the OSD 
  •  Touch and hold the right touch pad for 2 seconds to enter menus and save and exit them
  •  Touch and hold the left touch pad for 2 seconds to exit without saving
  •  Tap the right touch pad to increase the value of the selection
  •  Tap the left touch pad to decrease the value of the selection
  • If you have soldered the A/B/Select wires, hold down A/B/Select to open up OSD menu.
  • After installation, if it is noted that your touch sensor is overly sensitive or is cycling, please see this article for assistance. You can also turn off the touch sensors in the OSD menu.

WARNINGS:

  • Test the kit before installation! Once the display is mounted with the included double-sided foam tape, it cannot be safely removed. We ask that you test the kit by hooking it up before removing the screen protector and before mounting the display using the foam tape.
  • LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.
View full details